HSGQ-R1200:
SF19A2890 MIPS,dual-core 1GHz,3200dmips
16MB /128 DDR3
4*10/100/1000Mbps RJ45 (WAN*1+LAN*3)
2.4-2.4835GHz、5.150GHz~5.850GHz
Availability: | |
---|---|
Quantity: | |
Hardware Specifications
Master | |
Chip Solution | SF19A2890 MIPS,dual-core 1GHz,3200dmips |
FLASH / Memory | 16MB /128 DDR3 |
Antenna(external) | 2.4G:2T2R 5dBm 5.8G:2T2R 5dBm |
Port | 4*10/100/1000Mbps RJ45 (WAN*1+LAN*3) |
Button | WPS/RESET |
Power Supply | DC 12V/1A |
Indicator light | WiFi、WPS |
Wireless | |
Frequency Range | 2.4-2.4835GHz、5.150GHz~5.850GHz |
Wireless Rate | 11b: 1/2/5.5/11Mbps 11g: 6/9/12/18/24/36/48/54Mbps 11n: up to 300Mbps 11ac: up to 866Mbps |
Working Channel | 2.4G:1~13 5.8G: 36,40,44.48,52,56,60,64,149,153,157,161,165” |
Spread Spectrum Technology | DSSS(Direct Sequence Spread Spectrum) |
Data ModulationMethod | 802.11a: OFDM(BPSK,QPSK,16-QAM,64-QAM) 802.11b: DSSS(DQPSK,DBPSK,CCK) 802.11g: OFDM(BPSK,QPSK,16-QAM,64-QAM) 802.11n: OFDM(BPSK,QPSK,16-QAM,64-QAM) 802.11ac: OFDM(BPSK,QPSK,16-QAM,64-QAM,256-QAM)” |
Medium Access Protocol | CSMA/CA with ACK |
Data Encryption | WPA-PSK/WPA2-PSK、WPA/WPA2 |
Power(standard power) | 【2.4G】: 11b: 16dBm±2dBm@11Mbps 11g: 16dBm±2dBm@54Mbps 11n: 15dBm±2dBm@MCS7 【5.8G】: 11ac(VHT20): 19dBm±2dBm@MCS9 11ac(VHT40): 18dBm±2dBm@MCS9 11ac(VHT80): 18dBm±2dBm@MCS9 |
Button | |
Reset Button | 1 reset button, long press for 5 seconds to restore factory settings |
WPS | Short press to turn on, short press to turn off |
WiFi | Wireless indicator light (always on, data transmission flashes) |
WPS | the network is turn on, and the blue light is always on, when user is connecting, the wan indicator flashes blue,then turn off |
PCBA | |
Size Requirements | Designing from DXF documents |
Software Specifications
Status | Router status WiFi user connection status |
Language Requirements | Chinese and English bilingual |
Remote management | Support remote viewing, login and upgrade management device |
The Internet | |
Network Settings | Dynamic IP mode, broadband dial-up mode, static IP mode, default dynamic IP |
Mobile Connection | Data roaming, search operator, traffic settings |
local Area Network | DHCP setting, default LAN address is 192.168.1.1/24 |
Wireless | |
WiFi Settings | WiFi switch, name. password, protocol, bandwidth,channel, hidden |
Black And White list | Add (can be imported from user list), delete, move black and white lists |
WPS | PIN code access,PBC access |
Advanced Network Settings | |
IPv6 | Four IPv6 networking modes: relay mode, static IP, dynamic IP, and broadband connection. IPv6 is disabled by default |
APN | APN related information will be automatically adapted according to the inserted SlM card |
Guest Network | Off by default |
IPTV | Off by default |
Parental Control | Display the time period when the terminal's MAC address is used to access the external network. You can configure the switch, device name, MAC address, access time, description, status, etc. |
VPN Client | There are two types of VPN client configurations: PPTP and L2TP |
Firewall | |
ALG | Enable FTP / PPTP passthrough / L2TP passthrough |
Port Mapping | Support |
DMZ Settings | Enable and set the DMZ host address |
MAC Filtering | Add (you can import from the user list), delete. and move the whitelist |
IP Filtering | Add (you can import from the user list), delete, and move the whitelist |
NAT Settings | Completely conical, symmetrical. address restncted cone, port restricted cone, |
DDOS | Enable the network attack prevention function When this function is enabled, the router will start the network attack prevention function. When a host is detected to attack the router, it will automatically limit its bandwidth |
Management | |
SNTP | / |
Traffic Statistics | Traffic statistics are used to visually show the use of broadband resources by intranet PCs |
TR069 | The management server in the network management model defined by the TR069 protocol is called the automatic confiquration server (ACS), and is responsible for managing the user terminal equipment . The ACS server can complete restart, reset, and upgrade of router according to the TR069 protocol, which can implement the function of managing multiple routers |
change Password | Change the login password of the router |
Backup, Upgrade | Download the backed up configuration and upload the backed up configuration |
Restart, Reset | Includes immediate restart and scheduled restart |
Hardware Specifications
Master | |
Chip Solution | SF19A2890 MIPS,dual-core 1GHz,3200dmips |
FLASH / Memory | 16MB /128 DDR3 |
Antenna(external) | 2.4G:2T2R 5dBm 5.8G:2T2R 5dBm |
Port | 4*10/100/1000Mbps RJ45 (WAN*1+LAN*3) |
Button | WPS/RESET |
Power Supply | DC 12V/1A |
Indicator light | WiFi、WPS |
Wireless | |
Frequency Range | 2.4-2.4835GHz、5.150GHz~5.850GHz |
Wireless Rate | 11b: 1/2/5.5/11Mbps 11g: 6/9/12/18/24/36/48/54Mbps 11n: up to 300Mbps 11ac: up to 866Mbps |
Working Channel | 2.4G:1~13 5.8G: 36,40,44.48,52,56,60,64,149,153,157,161,165” |
Spread Spectrum Technology | DSSS(Direct Sequence Spread Spectrum) |
Data ModulationMethod | 802.11a: OFDM(BPSK,QPSK,16-QAM,64-QAM) 802.11b: DSSS(DQPSK,DBPSK,CCK) 802.11g: OFDM(BPSK,QPSK,16-QAM,64-QAM) 802.11n: OFDM(BPSK,QPSK,16-QAM,64-QAM) 802.11ac: OFDM(BPSK,QPSK,16-QAM,64-QAM,256-QAM)” |
Medium Access Protocol | CSMA/CA with ACK |
Data Encryption | WPA-PSK/WPA2-PSK、WPA/WPA2 |
Power(standard power) | 【2.4G】: 11b: 16dBm±2dBm@11Mbps 11g: 16dBm±2dBm@54Mbps 11n: 15dBm±2dBm@MCS7 【5.8G】: 11ac(VHT20): 19dBm±2dBm@MCS9 11ac(VHT40): 18dBm±2dBm@MCS9 11ac(VHT80): 18dBm±2dBm@MCS9 |
Button | |
Reset Button | 1 reset button, long press for 5 seconds to restore factory settings |
WPS | Short press to turn on, short press to turn off |
WiFi | Wireless indicator light (always on, data transmission flashes) |
WPS | the network is turn on, and the blue light is always on, when user is connecting, the wan indicator flashes blue,then turn off |
PCBA | |
Size Requirements | Designing from DXF documents |
Software Specifications
Status | Router status WiFi user connection status |
Language Requirements | Chinese and English bilingual |
Remote management | Support remote viewing, login and upgrade management device |
The Internet | |
Network Settings | Dynamic IP mode, broadband dial-up mode, static IP mode, default dynamic IP |
Mobile Connection | Data roaming, search operator, traffic settings |
local Area Network | DHCP setting, default LAN address is 192.168.1.1/24 |
Wireless | |
WiFi Settings | WiFi switch, name. password, protocol, bandwidth,channel, hidden |
Black And White list | Add (can be imported from user list), delete, move black and white lists |
WPS | PIN code access,PBC access |
Advanced Network Settings | |
IPv6 | Four IPv6 networking modes: relay mode, static IP, dynamic IP, and broadband connection. IPv6 is disabled by default |
APN | APN related information will be automatically adapted according to the inserted SlM card |
Guest Network | Off by default |
IPTV | Off by default |
Parental Control | Display the time period when the terminal's MAC address is used to access the external network. You can configure the switch, device name, MAC address, access time, description, status, etc. |
VPN Client | There are two types of VPN client configurations: PPTP and L2TP |
Firewall | |
ALG | Enable FTP / PPTP passthrough / L2TP passthrough |
Port Mapping | Support |
DMZ Settings | Enable and set the DMZ host address |
MAC Filtering | Add (you can import from the user list), delete. and move the whitelist |
IP Filtering | Add (you can import from the user list), delete, and move the whitelist |
NAT Settings | Completely conical, symmetrical. address restncted cone, port restricted cone, |
DDOS | Enable the network attack prevention function When this function is enabled, the router will start the network attack prevention function. When a host is detected to attack the router, it will automatically limit its bandwidth |
Management | |
SNTP | / |
Traffic Statistics | Traffic statistics are used to visually show the use of broadband resources by intranet PCs |
TR069 | The management server in the network management model defined by the TR069 protocol is called the automatic confiquration server (ACS), and is responsible for managing the user terminal equipment . The ACS server can complete restart, reset, and upgrade of router according to the TR069 protocol, which can implement the function of managing multiple routers |
change Password | Change the login password of the router |
Backup, Upgrade | Download the backed up configuration and upload the backed up configuration |
Restart, Reset | Includes immediate restart and scheduled restart |