loading
HSGQ-X111WC:
1*10/100/1000M Ethernet interface(RJ45)
1*10/100M Ethernet interface(RJ45)
1 EPON or GPON adaptive interface
2.4G WIFI
1*POTS
1*CATV
| Quantity: | |
|---|---|
Key Features
● Support device - based rate limitation and bandwidth control
● ln compliant with IEEE802.3ah &lTU-T G.984 standard
● Wi - Fi series meet 802.11 b/g/n technical standards
● Up to 20KM transmission distance
● Support data encryption, group broadcasting ,etc.
● Support Dynamic Bandwidth Allocation (DBA)
● Support ONU auto - discovery/Link detection/remote upgrade of software
● Support VLAN tag/untag configuration
● Support ACL to configure data packet filter flexibly
● Specialized design for system breakdown prevention to maintain stable system
● Support software online upgrading
● Support TRo69 for ACS(Auto Config Server)
● Support PPPoE/DHCP Server/NAT
● Support broadband and CATV services
● Support CATV service remote shutdown function
Voice Service Functions
● With the heartbeat function, support the main producing soft exchange platform
● Support ITU-T G.711,G.723.1,G6.729 and other three kinds of compression
● Support high / low speed mode transparent transmission,T38 two fax
● Support POTS interface and the three party call, three party support local mixing
● Support POTS port GR909 line test function
● Support dynamic PPPoE, DHCP and static IP
● 7 * 24 hour call loss is less than or equal to 0.01%
● Support power - off alarm function ,easy for link problem detection
● Support port binding
● Support SIP (compatible with lMS),H.248,MGCP three VolP protocol, and the soft switch platform the mainstream can be good intercommunication
● Support high-speed Modem (56Kbps) dial access; support RFC2833 and redundant RFC2833, ringing,MD5 certification, call forwarding, call waiting, the hotline, alarm clock, abbreviated dialing and other value-added services
WIFI Features(2.4G)
● Wi-Fi Specification lEEE 802.11n compliant,2.4 GHz
● Full IEEE 802.11b/g legacy compatibility with enhanced performance
● Two-stream spatial multiplexing up to 300Mbps PHY data rates
● Support multi-SSID (Maximum 4 SSID)
● Support automatic channel selection
● Support hide SSID
● Support wireless security of 64/128 bit WEP,802.1x,WPA and WPA2
Technical Parameter
| User interface | 1 10/100/1000M RJ45 1 10/100M RJ45 1POTS; 2.4G WiFi 1*CATV |
| PON | EPON&GPON mode adaptive Interface Type:SC-APC/SC-UPC Network coverage radius: 20KM GPON: upstream 1.25Gbps/downstream 2.5Gbps Optical receive sensitivity:-7dBm~-28dBm Continuous light power: 0.5dBm~+5dBm EPON: upstream 1.25Gbps /downstream 1.25Gbps Optical receive sensitivity:-7dBm~-27dBm Continuous light power: 0dBm~4dBm |
| POTS Port | 1*RJ11 with 3REN Max 1km distance Balanced Ring,55V RMS |
| Size | 140mm(L)x90mm(W) × 30mm(H) |
| Environment | Operating temperature:0°C~60℃ Operating humidity:10%~85%(non-condensing) Storage temperature:-40℃~80℃ Storage humidity:5%~95%(non-condensing) |
| Power supply | 12V/1A DC power interface size:2.1mm/5.5mm |
| Power | <8W |
| Management | WEB/TELNET/TR069/OMCI/OAM |
| CATV | Bandwidth 54-870MHz Output resistance 75 ohms |
Product Interfaces and Indicators Definitions
POWER
| Power status | On: The ONU is power on Off: The ONU is Power off |
PON
| ONU Register | On: Success to register to OLT Blinking: In process of registering to OLT Off: Fail to register to OLT |
LOS
| Optical Signals | On: Optical link is abnormal Off: Optical in normal |
LAN
| LAN Port status | On:Ethernet connection is normal Blinking: Data is being transmitted Off: Ethernet connection is not set up |
2.4G WIFI
| WIFI | On: WlFI function opens Blinking: Data is being transmitted Off: WIFl functions closes |
POTS
| POTS status | On: voice account Registered Off: Voice account not Registered |
CATV
| CATV status | On: CATV Optical power is okay Off: not optical power or Low optical power |
CATV
Optical input
| Wavelength(nm) | 1100-1600 |
| lnput optical power(dbm) | -15~0 |
| Optical return loss(db) | >45dB |
| AGC range(dbm) | -10~0 |
Link performance
| CNR(db) | >45dB |
| CTB(db) | >60dB |
| CSO(db) | >60dB |
RF output
| RF Impedance(ohm) | 75 |
| RF output return loss(db) | >14dB |
| RF frequency Range(Mhz) | 47~1000 |
| RF output lever(dBuV) | 80 |
Key Features
● Support device - based rate limitation and bandwidth control
● ln compliant with IEEE802.3ah &lTU-T G.984 standard
● Wi - Fi series meet 802.11 b/g/n technical standards
● Up to 20KM transmission distance
● Support data encryption, group broadcasting ,etc.
● Support Dynamic Bandwidth Allocation (DBA)
● Support ONU auto - discovery/Link detection/remote upgrade of software
● Support VLAN tag/untag configuration
● Support ACL to configure data packet filter flexibly
● Specialized design for system breakdown prevention to maintain stable system
● Support software online upgrading
● Support TRo69 for ACS(Auto Config Server)
● Support PPPoE/DHCP Server/NAT
● Support broadband and CATV services
● Support CATV service remote shutdown function
Voice Service Functions
● With the heartbeat function, support the main producing soft exchange platform
● Support ITU-T G.711,G.723.1,G6.729 and other three kinds of compression
● Support high / low speed mode transparent transmission,T38 two fax
● Support POTS interface and the three party call, three party support local mixing
● Support POTS port GR909 line test function
● Support dynamic PPPoE, DHCP and static IP
● 7 * 24 hour call loss is less than or equal to 0.01%
● Support power - off alarm function ,easy for link problem detection
● Support port binding
● Support SIP (compatible with lMS),H.248,MGCP three VolP protocol, and the soft switch platform the mainstream can be good intercommunication
● Support high-speed Modem (56Kbps) dial access; support RFC2833 and redundant RFC2833, ringing,MD5 certification, call forwarding, call waiting, the hotline, alarm clock, abbreviated dialing and other value-added services
WIFI Features(2.4G)
● Wi-Fi Specification lEEE 802.11n compliant,2.4 GHz
● Full IEEE 802.11b/g legacy compatibility with enhanced performance
● Two-stream spatial multiplexing up to 300Mbps PHY data rates
● Support multi-SSID (Maximum 4 SSID)
● Support automatic channel selection
● Support hide SSID
● Support wireless security of 64/128 bit WEP,802.1x,WPA and WPA2
Technical Parameter
| User interface | 1 10/100/1000M RJ45 1 10/100M RJ45 1POTS; 2.4G WiFi 1*CATV |
| PON | EPON&GPON mode adaptive Interface Type:SC-APC/SC-UPC Network coverage radius: 20KM GPON: upstream 1.25Gbps/downstream 2.5Gbps Optical receive sensitivity:-7dBm~-28dBm Continuous light power: 0.5dBm~+5dBm EPON: upstream 1.25Gbps /downstream 1.25Gbps Optical receive sensitivity:-7dBm~-27dBm Continuous light power: 0dBm~4dBm |
| POTS Port | 1*RJ11 with 3REN Max 1km distance Balanced Ring,55V RMS |
| Size | 140mm(L)x90mm(W) × 30mm(H) |
| Environment | Operating temperature:0°C~60℃ Operating humidity:10%~85%(non-condensing) Storage temperature:-40℃~80℃ Storage humidity:5%~95%(non-condensing) |
| Power supply | 12V/1A DC power interface size:2.1mm/5.5mm |
| Power | <8W |
| Management | WEB/TELNET/TR069/OMCI/OAM |
| CATV | Bandwidth 54-870MHz Output resistance 75 ohms |
Product Interfaces and Indicators Definitions
POWER
| Power status | On: The ONU is power on Off: The ONU is Power off |
PON
| ONU Register | On: Success to register to OLT Blinking: In process of registering to OLT Off: Fail to register to OLT |
LOS
| Optical Signals | On: Optical link is abnormal Off: Optical in normal |
LAN
| LAN Port status | On:Ethernet connection is normal Blinking: Data is being transmitted Off: Ethernet connection is not set up |
2.4G WIFI
| WIFI | On: WlFI function opens Blinking: Data is being transmitted Off: WIFl functions closes |
POTS
| POTS status | On: voice account Registered Off: Voice account not Registered |
CATV
| CATV status | On: CATV Optical power is okay Off: not optical power or Low optical power |
CATV
Optical input
| Wavelength(nm) | 1100-1600 |
| lnput optical power(dbm) | -15~0 |
| Optical return loss(db) | >45dB |
| AGC range(dbm) | -10~0 |
Link performance
| CNR(db) | >45dB |
| CTB(db) | >60dB |
| CSO(db) | >60dB |
RF output
| RF Impedance(ohm) | 75 |
| RF output return loss(db) | >14dB |
| RF frequency Range(Mhz) | 47~1000 |
| RF output lever(dBuV) | 80 |
